{{ variable.name }}
This 520H kit combines a heavy-duty 15.875 mm pitch chain with matched front and rear sprockets for 250-600cc motorcycles. The H series chain uses 45Mn plates and carburized, quenched and tempered pins and bushings. Sprockets are available in AISI 1045, SAE 1045, 40Cr or 20CrMnTi with 10T-52T teeth and HRC 40-48 tooth surfaces. The kit supports street, sport, touring and dual-sport replacement programs.

520H chain and sprocket kit

Matched kit for larger-displacement bikes

Machined sprocket detail
The 520H kit is a replacement chain and sprocket set for 250-600cc motorcycles. Its 15.875 mm pitch chain is built with 45Mn inner and outer plates, 20CrMnMo, 20CrNiMo or 30CrMnTi pins, and 20Mn, 20CrMnMo or 20CrNiMo bushes. Rollers use 10#, 20#, 35# steel or 20CrMnMo. Sprockets are machined from AISI 1045, SAE 1045, 40Cr or 20CrMnTi, with 10T-52T teeth and HRC 40-48 tooth surface hardness. The kit is designed for aftermarket replacement and OEM/ODM supply where a 428 chain is not specified.
| Parameter | Specification |
|---|---|
| Chain size | 520H |
| Pitch | 15.875 mm |
| Applicable displacement | 250-600cc |
| Chain versions | Heavy-duty H series; standard roller, O-ring or X-ring sealed and solid bush quoted on request |
| Inner and outer plate | 45Mn alloy steel |
| Pin | 20CrMnMo / 20CrNiMo / 30CrMnTi |
| Bush | 20Mn / 20CrMnMo / 20CrNiMo |
| Roller | 10# steel / 20# steel / 35# steel / 20CrMnMo |
| Sprocket material | AISI 1045 / SAE 1045 / 40Cr / 20CrMnTi |
| Tooth range | 10T-52T |
| Tooth surface hardness | HRC 40-48 |
| Service life | 25,000-30,000 km under normal riding conditions |
| Certification | INMETRO KT-MOTO-0050-2026 for 520H chain and sprocket kit; ISO 9001 |
| Quality control | 100% full inspection; tensile, fatigue and impact tests |
For 250-600cc street, sport, touring and dual-sport motorcycles. Provide the motorcycle model and year, front and rear tooth count and link count. The 520H kit is intended for larger-displacement singles and twins where a 520 pitch chain is specified; it is not a universal fit for 125-250cc models.
The chain uses 45Mn inner and outer plates, carburized and tempered pins, bushes and rollers. Plate hole center distance is held to normal distribution within 0.03 mm, and side plates are smooth blanked with a bright band ratio of at least 80% on the hole wall. Sprockets are machined from AISI 1045, SAE 1045, 40Cr or 20CrMnTi, then heat treated and hobbed for stable tooth engagement and low noise.
Street riding, sport riding, touring, highway use, mountain roads, dual-sport use and light off-road riding. O-ring or X-ring sealed versions are recommended for dusty, muddy, rainy and coastal conditions when specified.
Link counts, front and rear tooth counts, bore, keyway and mounting holes can be customized. Surface treatment options include bluing, black oxide, electroplating, nickel plating, zinc plating and powder coating. Chain and sprocket treatments can be specified separately. OEM and ODM development is supported per drawings or samples.
Send your motorcycle model and year, chain size, link count, front and rear tooth count, surface finish and order quantity to receive a configured quote.
Contact: Bona | Email: bona@hengjiu-pt.com | Tel / WhatsApp: +86 158-7092-0288 | Address: No.171, Sanqingshan West Road, Shangrao, Jiangxi, China - 334100.